*
slider-service
blockHeaderEditIcon

Parts overhaul

Overhaul of the compressed air horn air suspension Mercedes 600

The complete compressed airhorn  is cleaned and disassembled, the housing is treated and irradiated with clear lacquer, seals to be replaced, steel parts blasted and galvanized. The brass part is renewed. The duration of the overhaul is about 1 week. In urgent cases an already overhauled compressed air horn can be sent after sending us the old part. 

Price overhaul 320,00 € + VAT per piece




Overhaul frost protector of the air suspension Mercedes 300,600.

The complete frost protector is cleaned and disassembled, the housing is treated and irradiated with clear lacquer, seals to be replaced, steel parts blasted and galvanized. Nozzle is drilled to original measure. The duration of the overhaul is about 1 week. In urgent cases an already overhauled frost protector can be sent after sending us the old part. 

Price Overhaul 295,- € + VAT per piece


Overhaul air compressor of the air suspension for Mercedes 300 and 600, early and late version.

The complete air compressor is cleaned and disassembled. The housing is treated and irradiated with clear lacquer, sealing surfaces are planed, seals to be replaced, blasted steel parts and galvanized. The original repair kit is used and the ball bearing is renewed. The cylinder is re-honed. If necessary the crankshaft bearing and the big end bearing are rebuilt from brass and renewed.

The duration of the overhaul is about 1 – 2 weeks, depending on the condition of the bearings.

PLEASE NOTE: When overhauling the air compressor it is recommended to renew the oil hose from the oil filter to the air compressor as well.

Price overhaul without renewing of crankshaft bearing and big end bearing = 750,—Euro + VAT

Price overhaul with renewing of crankshaft bearing and big end bearing = 990,—Euro + VAT


Overhaul pressure regulator air suspension Mercedes 600.

The complete pressure regulator is cleaned and disassembled. The housing is treated and irradiated with clear lacquer seals to be replaced, blasted steel parts and galvanized. The pressure regulator is set and checked. The duration of the overhaul is about 1 week. In urgent cases, an already obsolete pressure regulator can be sent after sending the old part. .

Price Overhaul = 890, -Euro + VAT.


Overhaul air control valve of the air suspension for Mercedes 300 without the high position.

The complete valve is cleaned and disassembled. The housing is treated and irradiated with clear lacquer, seals to be replaced, blasted steel parts and galvanized. The brass offal be remade and renewed. The valve is adjusted and tested.

The duration of the overhaul is about 1 week. In urgent cases can also be sent after sending the old Part an already outdated.

Price Overhaul = 395, -Euro + VAT per piece. 


Overhaul air control valve Mercedes 300 / 600.

The complete valve is cleaned and disassembled. The housing is treated and irradiated with clear lacquer, seals to be replaced, blasted steel parts and galvanized.

The pressure switch will be renewed (if supplied), and the valve on the respective pressures of the vehicle (ATTENTION. 300 and 600 are NOT the same) set.

The duration of the overhaul is about 1 week. In urgent cases can also be sent after sending the old part an already outdated.

Price overhaul without pressure switch = 361.35 EUR + VAT.

Price overhaul with pressure switch = 410.35 EUR + VAT. 


Overhaul air control valve of the air suspension for Mercedes 300 and 600 within the high position.

The complete valve is cleaned and disassembled. The housing is treated and irradiated with clear lacquer, seals to be replaced, blasted steel parts and galvanized. The brass offal be remade and renewed. The valve is adjusted and tested.

The duration of the overhaul is about 1 week. In urgent cases can also be sent after sending the old Part an already outdated.

Price Overhaul = 395, -Euro + VAT per piece. 


Overhaul brake master cylinder Mercedes 600 (early and late version)

The complete cylinder is cleaned and disassembled. The housing is treated and irradiated with clear lacquer, the cylinder is re-honed. An original repair kit is mounted. After reassembly the cylinder is mounted on a test bench, where high and low pressure are tested.
The duration of the overhaul is about 2 weeks.
Price Overhaul = 595, - € + VAT per piece.


Overhaul brake master cylinder Mercedes 600 heating system

This brake master cylinder is opened up mechanically, disassembled and cleaned. The seals are replaced by reproductions. The housing of the cylinder is also reproduced and renewed, as it has to be crimped and is destroyed whilst disassembly.
All parts are cleaned. After reassembly the cylinder is mounted on a test bench and tested on function and tightness.
The housing is varnished black and furnished with a reproduced sticker. 
The duration of the overhaul is about 1 week.

Price Overhaul = 399,00 € + VAT per piece.

Username:
User Login
Your Email